Wax Melt Care

Use in approved wax warmers only. Molten Luxe wax melts are designed for electric or tealight warmers. Do not use on stovetops or open flames.

Place on a heat-resistant surface. Always use your warmer on a stable, heat-safe surface to protect furniture and prevent spills.

Never leave a wax warmer unattended. Turn off or extinguish your warmer before leaving the room or going to sleep.

Keep away from flammable objects. Position your warmer away from curtains, bedding, paper, and decorations.

Keep out of reach of children and pets. Warmers can become hot and contain melted wax—place them in a secure, elevated location.

Start with a clean warmer. Remove any old wax residue before adding new melts to ensure optimal scent throw and performance.

Do not overfill. Use only the recommended amount of wax melt per your warmer’s instructions to avoid spills and reduce fragrance efficiency.

Avoid draughts. Place your warmer away from vents, windows, or fans to prevent uneven melting and poor scent dispersion.

Do not add water or oils. Wax melts are designed to be used as provided. Adding other substances can be hazardous and damage your warmer.

Use unscented tealights only. Scented tealights may interfere with your wax melt fragrance and burn inconsistently.

Limit tealight sessions to 3–4 hours. This prevents overheating and preserves scent quality.

Monitor wax levels. Stop use when only a small amount of wax remains to avoid overheating the warmer dish.

Follow electric warmer instructions. Always refer to your warmer’s manual and unplug when not in use to prevent electrical hazards.

Replace wax when scent fades. Allow the wax to cool before removing and adding fresh melts.

Remove used wax safely. Let it harden and gently pop it out, or warm the dish slightly and wipe with a paper towel. Never pour hot wax down the drain.

Clean regularly. Wipe your warmer dish with a soft cloth between uses to maintain performance and prevent residue buildup.

Do not move while in use. Wait until the wax has cooled and solidified before relocating your warmer.